Call For Instant Pricing: 1-800-355-8444
MB8250 Aluminum Tooling Plank
We offer a truly metal-like machineable modeling plank for today’s demanding applications. MB8250 is an aluminum-filled product that is dimensionally stable and exhibits unsurpassed machinable properties. The BC8250 tooling plank will show a significant savings on billet aluminum tooling materials.
Product Features:
Density(lbs/ft3; gms/cm3): 99.84/1.60
Hardness: 85D
Heat Distortion (°F): 175
CTE (in/in/°F): 39.239×10-6
Color: Dark Gray
Adhesive: BC5003 Clear
Sizes: 2″, 3″x16″x60″
MB4000 Foundry Plank
We offer a revolutionary, state-of-the-art, machineable, foundry plank for today’s demanding tooling requirements. MB4000 red is an extremely tough, high-impact urethane plank that can replace aluminum and other metals in many foundry applications.
Product Features:
Density(lbs/ft3; gms/cm3): 71/1.14
Hardness: 86D Tg (°F): 240
Heat Distortion (°F): 214
CTE (in/in/°F): 35.60×10-6
Color: Red
Adhesive: BC5003
Red Repair: DP-11-75
Sizes: 2″-4″x16″x60″, 1″-6″x24″x60″
MB5000 High Density Tooling Plank
We offer a revolutionary state-of-the-art, machineable, high-density board for today’s demanding tooling requirements. MB5000 is an extremely tough, high-impact, urethane plank that can be used for metal forming as well as nickel plating mandrels.
Product Features:
Density(lbs/ft3; gms/cm3): 100/1.6
Hardness: 88D +2
Heat Distortion (°F): 195 Tg (°F): 215
CTE (in/in/°F): 2.29×10-5
Color: White
Adhesive: BC5003 Clear
Sizes: 1″, 2″, 3″x24″x60″
MB3500 Fixture Plank
We offer a revolutionary, state-of-the-art, machinable, fixture plank for today’s demanding tooling requirements. MB3500 is an extremely tough, high-impact urethane plank that can replace aluminum and other metals for many foundry applications.
Product Features:
Density(lbs/ft3; gms/cm3): 48/77
Hardness: 73D Tg (°F): 215
Heat Distortion (°F): 200
CTE (in/in/°F): 29.00×10-6
Color: Lt. Gray
Adhesive: BC5003 Clear
Repair: BC4570
Sizes: 2″-4″x16″x60″, 1″-6″x24″x60″
MB2001 Model and Tooling Plank
MB2001 is a dense, highly machineable, dimensionally stable, tooling plank for today’s CNC machining applications. An advancement over similar products on the market, MB2001 yields low dust emission during machining, is less abrasive to CNC cutters, and provides a highly defined surface finish.
Product Features:
Density(lbs/ft3; gms/cm3): 46.5/74
Hardness: 68D Tg (°F): 172
Tensile strength: 3,800
CTE (in/in/°F): 4.68×10-6
Color: Mahogany (Brown)
Adhesive: DP-11-88
Repair: BC4578
Sizes: 2″, 3″, 4″x16″x60″; 1″, 2″, 3″, 4″, 6″x24″x60″
MB1300 Polyurethane Foam Tooling Board (31 PCF)
MB1300 is a mahogany-colored, rigid, closed-cell, polyurethane foam tooling and modeling board with medium-low density foam of approximately 30lbs/ft3 board. Easily cut using CNC machining equipment, the MB1300 is perfectly suited for visual master models and architectural design models, as well as design verification and prototype tools.
Product Features:
Density (lbs/ft3): 31
Hardness (Shore D): 58
Tensile Strength (psi): 1,250
Flexural Strength (psi): 2,400
Service Temp (min/max): -300/+195
Compressive Strength: 2,200
CTE (in./in./°F): 33 x 10-6
Color: Mahogany
Adhesive: Dp-11-88
Repair: BC4578
Sizes: 2″, 3″, 4″, 6″x24″, 48″x60″
MB1200 Polyurethane Foam Tooling Board (20 PCF)
MB1200 is a rigid, closed-cell, polyurethane foam tooling and modeling board, with low-density foam of approximately 20lbs/ft3 board. Easily cut using CNC machining equipment or by hand, the MB1200 is perfectly suited for temporary master models, architectural design models, and foundry patterns, as well as design verification and prototype tools.
Product Features:
Density (lbs/ft3): 20
Hardness (Shore D): 40
Tensile Strength (psi): 895
Flexural Strength (psi): 1,330
Service Temp (min/max): -300/+195
Compressive Strength: 1,140–1,130
CTE (in./in./°F): 33 x 10-6
Adhesive: DP-11-83
Sizes: 2″, 4″, 6″, 8″x24″, 48″x96″
MB1150 Polyurethane Foam Tooling Board (15 PCF)
MB1150 is an avocado-colored, rigid, closed-cell polyurethane foam tooling and modeling board. MB1150 is low-density foam of approximately 15lbs/ft3 board. Easily cut using CNC machining equipment or by hand, the MB1150 is perfectly suited for temporary master models, architectural design models, and foundry patterns, as well as design verification and prototype tools.
Product Features:
Density (lbs/ft3): 15
Hardness (Shore D): 30
Tensile Strength (psi): 600
Flexural Strength (psi): 780
Service Temp (min/max): -300/+195
Compressive Strength: 560–590
CTE (in./in./°F): 33 x 10-6
Sizes: 2″, 4″, 6″, 8″x24″, 48″x96″
MB1100 Polyurethane Foam Tooling Board (10 PCF)
MB1100 is an olive-colored, rigid, closed-cell polyurethane foam tooling and modeling board. MB1100 is low-density foam of approximately 10 lbs/ft3 board. Easily cut using CNC machining equipment or by hand, the MB1100 is perfectly suited for temporary master models, architectural design models, and foundry patterns, as well as design verification and prototype tools.
Product Features:
Density (lbs/ft3): 10
Hardness (Shore D): 20
Tensile Strength (psi): 350
Flexural Strength (psi): 380
Service Temp. (min/max): -300/+195
Compressive Strength (psi): 280
CTE (in./in./°F): 33 x 10-6
Sizes: 2″, 4″, 6″, 8″x24″, 48″x96″-256
MODELING AND TOOLING BOARDS
EB6200 High-Temp Epoxy Tooling Board (“300°F Epoxy Board”)
The EB6200, available in 2, 4, and 6 inch x 24” x 60” has been developed to meet the needs of those in the aerospace, motorsport, and automotive industries.
Product Features:
Color Blue
Hardness Shore D 72 ASTM D-2240
Density g/cm 3 (lbs/ft3) 0.64 (40) ASTM D-792
Heat Deflection Temperature ºF 275 ASTM D-648
Glass Transition Temperature ºF >305 ASTM D-3418
Coefficient of Thermal Expansion in/in/ºF 19.4 x 10 -6 TMA
in/in/°C 35x 10 -6 TMA
Izod Impact, Notched (Un-notched) ft-lbs/in 0.56 (1.05) ASTM D-256