Call For Instant Pricing: 1-800-355-8444

BC5105 Laminating System
BC5105 is a clear, unfilled, low-viscosity laminating system. This heat-resistant resin exhibits excellent “wet-out” and reasonable working time. Generally it may be used at room temperature without post-curing; however, for use above 150°F, a post-cure may be required. BC5105 can be consistently used to 300°F . BC5105 does not contain VCHD or MDA. It’s useful for:

•Constructing vacuum form tools

•Injection and compression molds

•RTM and RIM molds

•Matched dies

Product Features:
Mix ratio: 100:17 by wt.

Mix ratio: 100:20 by vol.

Pot life: 55 minutes

Viscosity (Mixed)@ 75°F: 2,000cps

Cure schedule: 16–24 hours

Color: Clear

BC5114 Laminating System
BC5114 is a gray, low-viscosity laminating system. This heat-resistant resin exhibits excellent “wet-out” and reasonable working time. Generally it may be used at room temperature without post-curing; however, for use above 150°F, a post-cure is required. BC5114 does not contain VCHD or MDA. It’s useful for:

•Constructing vacuum form tools

•Injection and compression molds

•RTM and RIM molds

•Matched dies

Product Features:
Mix ratio: 100:13 by wt.

Mix ratio: 100:18 by vol.

Pot life: 60 minutes

Viscosity (Mixed)@ 75°F: 3,600cps

Cure schedule: 24 hours

Color: Gray

BE290 Laminating Resin System
BE290 is a low-viscosity, medium pot life, room-temperature laminating system. It features low odor, reduced toxicity, and adequate working life for constructing medium and large fabricated tools.

Product Features:
Mix ratio: 3:1 by wt.

Mix ratio: 2.5:1 by vol.

Pot life: 65–70 minutes

Viscosity (Mixed) @ 75°F: 2,700 cps

Cure schedule: 24 hours

Color: Green

BC5010 Laminating Resin
BC5010 is a high-quality, low-viscosity. room-temperature curing laminating resin that creates a safety system for the production of a variety of dimensionally stable fiberglass tools. BC5010 has a minimal odor and features rapid “wet-out” with no vertical drain off. It’s an excellent general-purpose laminating resin that meets the tooling requirements for automotive, aircraft, and foundry industries.

Product Features:
Mix ratio: 6:1 by wt

Mix ratio: 4.5:1 by vol.

Pot life: 25–30 minutes

Viscosity (Mixed)@ 75°F: 3,200cps

Cure schedule: 8–12 hours

Color: White or Blue

BC5009 Epoxy Adhesive and Laminating Resin
BC5009 is a very low viscosity, modified, unfilled room-temperature curing epoxy system with high-performance capabilities. Built for companies needing a 30-minute pot-life and an easily applied adhesive for bonding items like tooling/modeling boards and mid-to-large epoxy parts, as well as in other typical bonding environments, the BC5009 epoxy system will perform to your expectations. BC5009 is easy to mix, easy to apply by brush or trowel, and has excellent adhesion to most tooling materials and applications. Although this clear-amber epoxy adhesive is especially formulated for the bonding of wood and urethane model board, it may also be used as a laminating resin.

Product Features:
Mix ratio: 100:25 by wt.

Pot life: 30 minutes

Viscosity (Mixed)@ 75°F: 2,100cps

Cure schedule: 16 hours

Color: Translucent Amber

Hardness (shore D): 80

HDT (°F): 160

BC5008-2 General Purpose Resin System
BC5008-2 is a very low viscosity, modified, unfilled, room-temperature curing, general purpose resin system that will also function as a laminating system for horizontal surfaces. A clear amber material, with a medium pot life and heat resistance to 175°F, it is considered an excellent general-purpose adhesive for in-shop use.

Product Features:
Mix ratio: 100:25 by wt.

Mix ratio: 100:26 by vol.

Pot life: 25–30 minutes

Viscosity (Mixed)@ 75°F: 500cps

Cure schedule: 8–12 hours

Color: Clear Amber

laminating resins

BC5003 Laminating System
BC5003 is a medium viscosity, unfilled, laminating system. It’s a room-temperature curing resin with a relatively short pot life. It’s considered an excellent general-purpose adhesive for in-shop use. We recommend its use in gluing up BCC’s tooling board series.

Product Features:
Mix ratio: 100:20 by wt.

Mix ratio: 100:22 by vol.

Pot life: 14–15 minutes

Viscosity (Mixed)@ 75°F: 3,500cps

Cure schedule: 6–8 hours

Color: Amber or Red